Huntsville, AL are crucial for protecting the foundation, siding, and landscaping of your home from water damage. To ensure the gutter system functions properly, homeowners need to clean them regularly to remove clogs and other debris. While it is possible to install gutters yourself, the task is best left to professionals who have the tools and safety equipment needed to work from a ladder. Here are some tips to help you make the process go smoothly.

Start by assessing the condition of existing gutters, checking for dents, rust, and rot. Once you have an idea of what type and size of gutters you need, sketch out a plan for the layout. This will allow you to accurately measure each gutter run, including corners and angles. It will also let you know the number and location of downspouts you’ll need.

Top Benefits of Installing Quality Gutters with Ensz & Sons

To mark the location of downspout outlets, turn a gutter section upside down and trace around the lower end. Center the outlet flange over this mark and trace around it again. Then, cut the outlet hole with tin snips, using either red or green tin snips (red cuts counterclockwise and green cuts clockwise).

Next, use a hammer drill to predrill holes for the pop rivets that will join the gutter sections together. Then, install the rivets with a ratchet wrench. To keep the joints watertight, seal them with silicone or gutter sealant. Once the gutters are in place, fasten them to the fascia boards with 1/4-inch stainless steel lag screws long enough to penetrate rafters at least 2 inches.

“Ensz & Sons Gutters of Huntsville
”
248 Shadow Ct SW Huntsville 35824
(662) 435-4332